1-4 24-Port Ethernet Hub. X McDATA Sphereon 4400 Fabric Switch Installation and Service Manual Contents.

Wiso Mein Geld 2014 Keygen Free on this page. McData switch OS is case-sensitive - that may be your problem. To reset the password, you'll need the serial cable. Connect the cable to the serial port on the switch. Open Hyperterminal (download the latest revision from if you haven't already) and connect at 57600 baud, 8, none, 1. Hit enter a couple of times and you'll get a prompt (I don't recall exactly what that is). Use either 'level-2' or 'redips' as the password.

You'll be presented with a menu - you should now be able to erase NVRAM to factory default. Default username and password is Administrator/Administrato r - again, it's case sensitive.

To Configure McData 4500 Switches Steps • Connect a crossover Ethernet cable between the switch and management station. • Initialize the interface with the following IP: • ifconfig ce1 plumb • ifconfig ce1 10.1.1.11 netmask 255.0.0.0 broadcast + up • Login to management station and launch a web browser and type the default IP address for the switch 10.1.1.10 • When the web browser prompts with login and password screen, provide the following information to access the SAN pilot interface: • Login: Administrator • Password: password • On the SAN pilot interface, select the configure option on left panel and choose the Network tab. Assign the IP and netmask to the switch. • Select the Identification tab and update the switch name. • Select the Date and Time tab and update it with accurate information.

• Select the Parameter tab and update the switch's domain ID based on. • Enable the persistent domain ID to ensure the switch will initialize with the proper domain id.

Leave the default value for the other parameters. • Set the switch to Interop mode. • Click on Activate to enable the new settings.

Saxon Phonics Program Employment. • Each switch comes with 8 ports activated, and you need to activate the other ports on each switch by installing the activation keys: • Select Operation on the navigation panel and choose the Feature Installation tab. • Enter the Activation key in the Feature Key field and click on Activate. This will enable an additional 8 ports on the switch.